Responsive PlaceImg

Two Katana Stand

  • Materials:
    Nozzle:
    Nozzle-X
    Print Settings:
    Cleanliness: clean
    Solvent: iso_91
    Head Temp: 210 Bed Temp: 65
    Array

    Print Speed: 100

    Change Point: 0

    Cleanliness: clean
    Solvent: iso_91
    Head Temp: 210 Bed Temp: 65
    Array

    Print Speed: 100

    Change Point: 0

    Model:
    Model:download_modal
    Results:
    Results of print
    Start Time:
    2021
    End Time:
    2021
    Result:
    success
    Notes:

    Mount is barely large enough to hold a sheithed Katana, testing it out caused an end to snap off. Might be a problem with using PLA. Upscaling the next print. Print itself was flawless.

    Grade:
    A
    Results of print
    Start Time:
    2021
    End Time:
    2021
    Result:
    fail
    Error Notes:

    Filament was tangled. Attempted to fix on the fly and allowed it to run unattended with no filament for a layer. Thought it might work, but it broke off at the 46{18f2a1c8661e854b2e7d87a7d5bbee59115925ac5ccaf4cf5c4eb2359cfc55fb} mark

    Results of print
    Start Time:
    2021
    End Time:
    2021
    Result:
    success
    Notes:

    Upscaled to 115{18f2a1c8661e854b2e7d87a7d5bbee59115925ac5ccaf4cf5c4eb2359cfc55fb} for a better fit. Print was damned near flawless!

    Grade:
    A
    Results of print
    Start Time:
    2021
    End Time:
    2021
    Result:
    success
    Notes:

    Also flawless!

    Grade:
    A

V2 Data Model

  • Materials
    Printer
    : 0.4mm
    Model:
    Model:download_modal
    Prints: