DJI Mavic Mini Battery Case – Mk2 (Copperfill)

• Materials:
  Nozzle:

  Nozzle-X
  Print Settings:

  Cleanliness: clean

  Solvent: iso_91

  Head Temp: 210 Bed Temp: 65

  Array

  Print Speed: 100

  Change Point: 0

  Model:

  Model:download_modal

  Download Link
  Results:

  Results of print

  Start Time:
  2021

  End Time:
  2025

  Result:
  fail

  Error Notes:

  Separated from the print bed at about the 65{18f2a1c8661e854b2e7d87a7d5bbee59115925ac5ccaf4cf5c4eb2359cfc55fb} mark. Temp went down to 60 degrees without my notice. RAGE!!!!!!

  Results of print

  Start Time:
  2021

  End Time:
  2025

  Result:
  aborted

  Error Notes:

  Did not adhere to the print bed. Aborted immediately

  Results of print

  Start Time:
  2021

  End Time:
  2025

  Result:
  fail

  Error Notes:

  Print made it roughly 95{18f2a1c8661e854b2e7d87a7d5bbee59115925ac5ccaf4cf5c4eb2359cfc55fb} of the way complete, then broke off from the print bed at the spot where the bridge over the opening at the top was supposed to be.

  Results of print

  Start Time:
  2021

  End Time:
  2021

  Result:
  success

  Notes:

  Caught a slight snag at some point midway through. Printed this one with a brim and the output was damned near flawless.

  Grade:

  A

V2 Data Model

• Materials
  Printer

  : 0.4mm
  Model:

  Model:download_modal
  Prints: